Việt Nam
English
Marechal
  • Công-ty-CP-Kỹ-Thuật-TM-Thiết-Bị-Công-Nghiệp-NTD-359601070816160/
    TRANG CHỦ
    GIỚI THIỆU
    SẢN PHẨM
    BẢN TIN CÔNG TY
    TUYỂN DỤNG
    LIÊN HỆ
Pressure Gauges Thermocouples Pressure Switch Pressure Sensor Compensating Cable/Duplex Wire Digital Pressure Gauge Resistance Temperature Detectors Temperature Pressure Thermowells Flow & Heat metter
Signal Conditioners Two-wire Signal Conditioners Power Transducers Indicators Tower Light Limit Alarms Gateway-Remote-I/O Paperless Recording System PC Recorder Web Data Loggers PID Control Components Temperature Controllers Electric Actuators Lightning Surge Protectors
Asco Manually Operated Valves ASCO Medical and Analytical Valves ASCO Numatics Valve Islands ASCO Oil & Gas Valves (ATEX) ASCO Pneumatic Accessories ASCO Proportional Technology Aventics Compressed Air Preparation Aventics Cylinder Accessories Aventics Electrical Connection Technologies Aventics Flow and Check Valves Aventics Pneumatic Connection Technologies Aventics Pressure Regulators Aventics Sensors Aventics Vacuum Technologies Aventics Valves and Valve Systems
Burner Controls Flame Amplifiers For Microprecessor Control Flame Amplifiers For Electromechanical Control ULTRAVIOLET MODUTROL MOTOR SENSORS HONEYWELL MICRO SWITCH SNAP-ACTION SERIES MICRO SWITCH HAZARDOUS AREA SWITCHES KEY AND ROTARY SWITCHES MICRO SWITCH LIMIT SWITCHES Pressuretrol MICROPROCESSOR DISPLAY MODULE MICROPROCESSOR RELAY MODULE ELECTROMECHANICAL RELAY MODULE RELAYS HONEYWELL
Bộ điều khiển nhiệt độ SDC Azbil Burner Controller Azbil Recorder Flame Detector Pressure Transmitters
DECONTACTOR™=SWITCH+SOCKET-OUTLET RETTBOX® (Rescue) MULTICONTACT CONNECTORS INDUSTRIAL PLUGS & SOCKET-OUTLETS SINGLE POLE POWER CONNECTORS CUSTOM SOLUTIONS MULTICONTACT EX EX INDUSTRIAL PLUGS SINGLE POLE EX EX CUSTOM SOLUTIONS
Accessories Actuators - Bộ truyền động Data acquisition and recording Emissions and Combustion Analysis Industrial Automation Sensors and Transmitters Refrigeration
DANH MỤC SẢN PHẨM
  • NAGANOKEIKI NAGANOKEIKI
  • YAMARI - Temperature sensor YAMARI - Temperature sensor
  • M-SYSTEM M-SYSTEM
  • Signal Conditioners
    Two-wire Signal Conditioners
    Power Transducers
    Indicators
    Tower Light
    Limit Alarms
    Gateway-Remote-I/O
    Paperless Recording System
    PC Recorder
    Web Data Loggers
    PID Control Components
    Temperature Controllers
    Electric Actuators
    Lightning Surge Protectors
  • ASCO NUMATIC ASCO NUMATIC
  • BARKSDALE BARKSDALE
  • HONEYWELL HONEYWELL
  • AZBIL - YAMATAKE AZBIL - YAMATAKE
  • MARECHAL MARECHAL
  • ORANGE RESEARCH ORANGE RESEARCH
  • ASCON TECHNOLOGIC ASCON TECHNOLOGIC
  • MAXON - BURNER MAXON - BURNER
  • ECLIPSE - BURNER ECLIPSE - BURNER
  • KROMSCHRODER KROMSCHRODER
  • HUBA CONTROL HUBA CONTROL
  • OMRON OMRON
  • FANTINELLI FANTINELLI
  • HANYOUNG NUX HANYOUNG NUX
  • SCHNEIDER SCHNEIDER
  • TECHNOR TECHNOR
  • STARRETT STARRETT
  • OXFORD-USA OXFORD-USA
  • GENERAL GENERAL
  • DURAG DURAG
  • TESCOM TESCOM
  • MATSUSHIMA MATSUSHIMA
  • DELTA MOBREY DELTA MOBREY
  • GASTRON GASTRON
  • DITEL DITEL
  • TOPWORX TOPWORX
  • ASHCROFT ASHCROFT
  • Taik Electric Taik Electric
  • OPTONE OPTONE
  • GF GF
  • Sirai Sirai
  • ĐỐI TÁC
    • Signal Conditioners
      Signal Conditioners
    • Temperature sensor
      Temperature sensor
    • Process Control - FSG
      Process Control - FSG
    • FLUID CONTROL
      FLUID CONTROL
    • Advance Automation
      Advance Automation
    • Industrial automation Refrigeration
      Industrial automation Refrigeration
    • HUBA CONTROL – For Fine Pressure And Flow Measurement
      HUBA CONTROL – For Fine Pressure And Flow Measurement
    • ELECTRICAL PLUGS & SOCKET-OUTLETS
      ELECTRICAL PLUGS & SOCKET-OUTLETS
    • BURNER
      BURNER
    • BURNER
      BURNER
    M-SYSTEM >> Paperless Recording System

    71VR1 Series PAPERLESS RECORDER

    Cập nhật: 2/17/2020 - Số lượt đọc: 2159
    Thông tin sản phẩm
    Giá: Call  
    Hãng sản xuất: M-system  
    Bảo hành: Số lượt xem:2159  
    71VR1

    Paperless Recording System

    PAPERLESS RECORDER
    (color LCD display)

    Functions & Features
    • 96 mm square size
    • Records, displays and sets alarms for 8 analog and 8 contact inputs and 8 contact outputs
    • Maps the remote I/O data to logical channels
    • Built-in I/O: 2 analog, 3 universal and 2 contact inputs and 2 contact outputs
    • Trigger function: Records only necessary part of the data
    • Recorded data can be transferred to a PC with memory cards or COP-IRDA and converted to CSV format with 71VRCFG
    • TFT color LCD
    • IP65 front panel
    • Separable two pieces terminal block
    • Safety terminal cover tethered to the device with a strap
     

    MODEL: 71VR1-[1][2]1-[3][4]

    ORDERING INFORMATION
    • Code number: 71VR1-[1][2]1-[3][4]
     Specify a code from below for each [1] through [4].
      (e.g. 71VR1-N101-M2/Q)
    • Specify the specification for option code /Q
      (e.g. /C01)

    [1] LANGUAGE
    N: Japanese
    E: English
    (Language (Japanese or English) can be chosen by front
    panel setting.)

    [2] ANALOG INPUT
    00: None
    10: DC input, 2-points
    50: DC input, 2-points,
    Universal input, 3-points (V, mA, T/C, RTD)

    EXTERNAL INTERFACE
    1: Modbus

    [3] POWER INPUT
    AC Power
    M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)
    DC Power
    R: 24 V DC
    (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
    P: 110 V DC
    (Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

    [4] OPTIONS
    Other Options
    blank: none
    /Q: Option other than the above (specify the specification)

    SPECIFICATIONS OF OPTION: Q
    COATING (For the detail, refer to M-System's web site.)
    /C01: Silicone coating
    /C02: Polyurethane coating
    /C03: Rubber coating

    RELATED PRODUCTS
    • Precision Resistor Module (model: REM2-50)
    Use for mA universal input
    • Infrared communication adaptor (model: COP-IRDA)
    • PC configurator software (model: 71VRCFG)
    Downloadable at M-System’s web site.
    • Remote I/O R3 series
    Modbus interface module (model: R3-NM1)
    • Remote I/O R5 series
    Modbus interface module (model: R5-NM1)
    • Modbus I/O module (model: R7M)
    R7 Configurator Software (Model: R7CON)
    Modbus communication parameters of the R7M must be configured by using R7CON and the dedicated cable.
    • Devices equipped with Modbus communication. For detailed information, visit the M-System’s web site.
    • Memory card
    A memory card is required to store data in the unit.
    Use the specified model number of memeory card.
    Available for purchase from M-System. Consult M-System.
      - Hagiwara Solutions NSD6-004GH 
      (NSD6-002GT and NSDA-004GT, NSDA-004GL ... discontinued)
      - Apacer Technology AP-ISD04GIS4B-3T
      (AP-ISD04GIS4B-T ... discontinued)

    GENERAL SPECIFICATIONS
    Construction: 96-mm square (1/4 DIN size) panel flush mounted
    Degree of protection: IP65; applicable to the front panel of the recorder with single mounting according to the specified panel cutout
    Connection: M3 separable screw terminal (torque 0.5 N·m)
    Screw terminal: Nickel-plated steel
    Housing material: Flame-resistant resin (black)
    Isolation: Analog input each other to contact input to contact output 1 to contact output 2 to Modbus interface to power input to FE (Functional Earth)
    Number of assignable logical channels
    Analog input: 8 points max.
    Contact input: 8 points max.
    Contact output: 8 points max.
    Data storage: Stores Trend and Alarm history in memory card.
    Trend: Stored in files named time and date.
      60000 samples in one file
      Storage capacity: 200 files max.
      Storage time:
      Approx. 13 days at storing rate 0.1 sec.,
      approx. 138 days at 1 sec.,
      approx. 1388 days at 10 sec.,
      approx. 8333 days at 1min.,
      approx. 250000 days at 30 min.,
      approx. 500000 days at 1 hour.
    Alarm history: Stored in alarm history file, 200 items max.
    ■ DISPLAY
    Display device: 3.5-inch TFT LCD
    Display colors: 256
    Resolution: 320 × 240 pixels
    Backlight: LED
    Display update interval: 500 msec.

    INPUT SPECIFICATIONS
    ■ Universal Input (Ai3, Ai4, Ai5)
    • DC current input
    (Range: Input resistance)
    -20 – +20 mA: 50 Ω (separately provided REM2)
    • DC voltage input
    (Range: Input resistance)
    -1 – +1 V: ≥ 1 MΩ
    -5 – +5 V: ≥ 1 MΩ
    -10 – +10 V: ≥ 1 MΩ
    • Thermocouple input: K, E, J, T, B, R, S, C, N, U, L, P, PR (See Table 1.)
    Input resistance: ≥ 30 kΩ
    Burnout sensing: ≤ 0.1 μA
    Burnout indication: Maximum value (upscale burnout)
    of the usable range
    • RTD input: Pt 100 (JIS ’97, IEC), Pt 100 (JIS ’89), JPt 100 (JIS ’89), Pt 50Ω (JIS ’81), Ni 100, Cu 10, Cu 50  (See Table 2.)
    Input resistance: ≥ 1 MΩ
    Maximum leadwire resistance: 100 Ω per wire
    Burnout indication: Maximum value (upscale burnout) of the usable range
    Sensing current: ≤ 1 mA
    ■ DC Current Input (Ai1, Ai2)
    (Range: Input resistance)
    -20 – +20 mA: 100 Ω (incorporated)
    ■ DC Voltage Input (Ai1, Ai2)
    (Range: Input resistance)
    -1 – +1V: ≥ 1MΩ
    -5 – +5V: ≥ 1MΩ
    -10 – +10V: ≥ 1MΩ
    ■ Contact Input (Di1, Di2): Dry contact, 2 points
    Input resistance: Approx. 1.8 kΩ
    Common: Negative
    Sensing: 12 V DC
    ON current/resistance: ≥ 1.5 mA, ≤ 1.5 kΩ
    OFF current/resistance: ≤ 0.75 mA, ≥ 15 kΩ

    OUTPUT SPECIFICATIONS
    ■ Network Interface
    • Modbus-RTU: Retrievable analog data is Int data (signed 16 bits) only.
    Transmission: Half-duplex, asynchronous, no procedure
    Interface: Conforms to EIA RS-485
    Max. transmission distance: 500 meters
    Baud rate: 4800, 9600, 19200, 38400 bps
    Data bit: 8 bits
    Parity: Odd
    Stop bit: 1 bit
    Max. number of nodes: 15 (except the master)
    Media: Shielded twisted-pair cable (CPEV-S 0.9 dia.)
    • Infrared Interface
    Interface: IrDA
    Max. transmission distance: ≤ 0.2 m (with COP-IRDA and 71VRCFG)
    ■ Contact Output (Do1, Do2)
    • Relay Output
    Relay rating:
    250 V AC @5 A (cos ø = 1)
    30 V DC @5 A (resistive load)
    Maximum switching voltage: 250 V AC or 30 V DC
    Maximum switching power: 1250 VA or 150 W
    Minimum load: 5 V DC @10 mA
    Mechanical life: 2 × 107 cycles

    INSTALLATION
    Power consumption
    •AC:
     Approx. 7 VA at 100 V
     Approx. 10 VA at 240 V
    •DC: Approx. 6 W
    Operating temperature: -5 to +55°C (23 to 131°F)
    Operating humidity: 30 to 90 %RH (non-condensing)
    Atmosphere: No corrosive gas or heavy dust
    Mounting: Panel flush mounting
    Weight: 550 g (1.21 lb)

    PERFORMANCE
    Conversion accuracy
    DC input
    : ±0.1% ±1 digit
    Thermocouple input: ±1°C (±2°C for B, R, S, C, PR)
    RTD input: ±1°C (±3°C for Cu 10)
    CJC error: ±2°C max. at 25°C ±10°C
    ±4°C max. for R, S, PR
    Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
    (±0.05 %/°C (±0.03 %/°F) for Cu 10) of max. span
    Response time: ≤ 0.5 sec. for DC input with the sample
    rate set to 100 msec.
    ≤ 2.5 sec. for T/C, RTD input with the sample
    rate set to 500 msec.
    Response time of alarm output, 0 – 100 % at 90 % setpoint.
    Line voltage effect: ±0.1 % over voltage range
    Calendar clock accuracy: Monthly deviation 2 minutes at 25°C
    Battery backup: Approx. one month
    Insulation resistance: ≥ 100 MΩ with 500 V DC
    Dielectric strength: 2000 V AC @1 minute
    (Analog input each other to contact input to contact output 1 to contact output 2 to Modbus interface to power input to FE)

    STANDARDS & APPROVALS
    EU conformity:
    EMC Directive 
      EMI EN 61000-6-4
      EMS EN 61000-6-2
    Low Voltage Directive 
     EN 61010-1
     Measurement Category II (contact output)
     Installation Category II (power)
     Pollution degree 2
    Analog input or contact input or contact output or network interface to power to FG: Reinforced insulation (300 V)
    Analog input each other to contact input to contact output each other to network interface: Basic insulation (300 V)
    RoHS Directive
      EN 50581
    Protection against access to the terminal blocks:
    Finger protection (VDE 0660-514)

    EXTERNAL VIEW

    MODBUS WIRING CONNECTION

    EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

    MOUNTING REQUIREMENTS unit: mm (inch)

    SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
    Note: In order to improve EMC performance, bond the FE terminal to ground.
    Caution: FE terminal is NOT a protective conductor terminal.

    SYSTEM CONFIGURATION EXAMPLES

    M-System Vietnam
    Email: sales@m-system.com.vn
    Tags
    71VR1 Series PAPERLESS RECORDER M-system Vietnam
    CÁC TIN KHÁC
    • TR30 PAPERLESS RECORDER
      Mã số : TR30 Paperless Recorder
      TR30 Paperless Recorder TR30 Series PAPERLESS RECORDER
      Giá:  Call
       | TR30 PAPERLESS RECORDER
    • 71VR1 Series PAPERLESS RECORDER
      Mã số : 71VR1 Series PAPERLESS RECORDER
      71VR1 Series PAPERLESS RECORDER M-system Vietnam
      Giá:  Call
       | 71VR1 Series  PAPERLESS RECORDER
    Quảng cáo
    THỐNG KÊ

    may cat giay

    Lượt truy cập: 333884
    may cat giay
    Đang online: 7
    ĐỐI TÁC

    CÔNG TY CỔ PHẦN KỸ THUẬT VÀ THƯƠNG MẠI THIẾT BỊ CÔNG NGHIỆP NTD

    Địa chỉ: Số 28, ngõ 36 Cổ Linh, tổ 7, P. Long Biên, Q. Long Biên, TP. Hà Nội

    Hotline: 0971961212

    sales@ntd-automation.com

    Tags: Yamari Vietnam, M-System Vietnam, Honeywell, Azbil, Yamatake, Ascon Tecnologic, Asco Numatic,
    Thiết kế web bởi haanhco.,ltd
    0971961212 Facebook: 359601070816160Zalo: 0971961212