| Sensor element: | Ceramic sensor (standard)
Optional: piezoresistive sensor(For proper sensor selection see product configuratorfor more details.) |
Materials:
Wetted parts:
Enclosure:
Seals: |
304 Stainless steel (if surge dampener is required)
304 Stainless steel, PBT
FKM fluorelastomer (standard)
EPDM (optional) |
| Operating elements: | 3 easy-response push-buttons |
| Enclosure rating: | Type 4X (IP65) / Type 6 (IP67) |
| Protection class: | III |
| Electrical connection: | Plug M12 x 1, 4-pin / 5-pin |
| Process connection: | 1/4" NPT, 1/2" NPT flush diaphragm, 7/16-20 (SAE), 7/16-20 (JIC 37°X), G1/4" M, G1/2" flush diaphragm (only piezoresistive) |
| Dimensions: | 1.6 Ø x 4.4 inches (without plug connector) |
| Weight: | Approx. 0.4 lb (200 g) |
| Proof pressure: | 1.5X rated pressure |
A/D-Converter:
Resolution:
Scanning rate: |
12 bit (4,096 steps per measure span)
1000/s |
| Linearity error: | < ±0.5 % f. s. at +25 °C |
| Temperature influence: | TC zero < ±0.2 % FSO / 10K
TC span < ±0.3 % FSO / 10K |
| Compensation range: | 14°F to 158°F (-10°C to +70°C) |
| Repeatability: | ±0.1% f. s. |
Temperature range:
Media:
Electronics:
Storage: |
-13°F to 212°F (-25°C to +100°C)
14°F to 158°F (-10°C to +70°C)1
-22°F to 176°F (-30°C to +80°C) |
| Power supply: | 15 to 32 V DC1, reversed polarity protected (SELV, PELV)
Class 2 |
| Power consumption: | Approx. 50 mA (without load)
Approx. 80 mA (Output Code 6) |
Digital display:
Display rate: | 4-digit 14-segment LED red display, digit height .35 inches (9 mm)
20/s |
| Error display: | LED RED and alphanumeric display |
Analog output:
Current output:
Scanning rate:
Voltage output:
Rating:
Adjustment range: |
4-20 mA
2 ms
0 to 10 V DC
max. 10 mA
25% to 100% f. s. |
| Transistor switching outputs: |
Switching function
Switching output:
Adjustment range for switching point and hysteresis:
Switching frequency:
Load:
Delay:
Status display(s): | Normally open / normally closed,standard /window mode and diagnosisfunction adjustable
PNP / NPN (Field-Selectable on IO-Link Units)
0% to 125% f. s.
Max. 100 Hz
Max. 500 mA, short-circuit-proof
IO-Link: Max. 250ma
0.0 s to 50.0 s adjustable
LED(s) red |
| IO-Link Communication Interface |
Transmission type:
IO-Link revision:
SDCI standard:
Profiles:
SIO modules:
Required master port type:
SIO output:
Min. process cycle time [ms]:
Device ID: | COM2 (38.4 kBaud)
1.1
IEC 61131-9
Smart Sensor, Process Data Variable, Device Identification, Device Diagnosis
Yes
A
1 analog / 2 binary (switch points) [see product configurator]
2.5
0x011...
|
| EMI | EN 61000-4-2 ESD | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HFradiated | 10 V/m |
| EN 61000-4-4 Burst | 2 kV |
| EN 61000-4-5-Surge | 1/2 kV |
| EN 61000-4-6 HFconducted | 10 V |
| Shock resistance | DIN EN 60028-2-27 | 50 g (11 ms) |
| Vibration resistance | DIN EN 60028-2-26 | 20 g (10 to 2000 Hz) |
|
* See product configurator for additional options.
Note 1: Condition of use with cULus: 140°F max. ambient; power supply: max. 28 V DC
Note 2: BV approval only with output code 1-5; for more details please see BV certification. |
NAGANOKEIKI
