Digital panel meter PICA104-F | Đồng hồ Ditel PICA104-F

The frequency or speed indicator PICA104-F with its 48x24mm format, its 2 ALARMS INCLUDED and RS485 output, added to its simplicity of programming and LOW COST, make it ideal for CONTROLLING, REGULATING and DETECTING in switchboards

Instrument size 48x24mm (1/32 DIN), fully programmable, with 4-digit red LED 8mm high for measurement of frequencies and speeds in rpm or linear </ strong>. It supplies power to the sensor, selectable by programming.

Its two built-in relays make it an element that, in addition to measuring, can control, regulate and detect alarms on the mentioned signals.

Thanks to the RS4P output (RS484) included, it can be integrated into a measurement system to provide information through its MODBUS-RTU protocol. This option is isolated from the input and the power supply.

Tachometer in TAC mode, programming only the number of pulses per revolution or in Rate mode programming the Frequency / Display ratio (in the desired engineering unit).
Display range from 0 to 9999 with programmable decimal point.
Three keys located on the lower front for the configuration of all parameters.
Brightness level programmable in four levels to adapt it to the environment where you work. Registers the minimum and maximum value.
It is possible to block the configuration completely or partially by means of a code.

Power supply 85-265VAC PICA104-F
Power supply 10,5-70 VDC PICA104-F6

Digital Panel Meters Ditel|PID Controllers Ditel|Graphic Large Display Ditel|Isolators and converters Ditel. NTD phân phối các thiết bị của hãng DITEL tại Việt Nam