Functions & Features • Lighting, blinking and buzzing are controllable with PLC. • Bi-color lighting available in fourth layer • Separable tension clamp terminal • Switchable between positive and negative common for input • Sensor excitation (24 V DC) incorporated
MODEL: IT60A1-4[1][2][3][4][5]D[6]-[7][8]
ORDERING INFORMATION • Code number: IT60A1-4[1][2][3][4][5]D[6]-[7][8] Specify a code from below for each [1] through [8]. (e.g. IT60A1-4RYGBWD1-M2/Q) • Specify the specification for option code /Q (e.g. /C01)
LAMP LAYERS 4: 4 layers
[1] LAMP 1 COLOR (1st layer from the top) R: Red Y: Amber G: Green B: Blue W: White
[2] LAMP 2 COLOR (2nd layer from the top) R: Red Y: Amber G: Green B: Blue W: White
[3] LAMP 3 COLOR (3rd layer from the top) R: Red Y: Amber G: Green B: Blue W: White
[4] LAMP 4 COLOR (4th layer from the top) R: Red Y: Amber G: Green B: Blue W: White
[5] LAMP 5 COLOR R: Red Y: Amber G: Green B: Blue W: White N: None
MOUNTING D: Direct mounting
[6] DESIGN TYPE 1: Type 1 2: Type 2 (with dummy antennae) (refer to outline dimensions)
[7] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[8] OPTIONS blank: none /Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating
GENERAL SPECIFICATIONS Degree of protection: IP 65, vertical mounting only (bottom connectors excluded) Connection Power input/Input: Separable tension clamp terminal Applicable wire size: 0.2 to 1.5 mm2, stripped length 10 mm Recommended solderless terminal: AI0,5-10WH 0.5mm2 (Phoenix Contact) AI0,75-10GY 0.75mm2 (Phoenix Contact) Housing material: Flame-resistant resin (white) Lens: Flame-resistant resin (transparent) Isolation: Discrete input to power input to FE1 (Functional Earth) DIP SW Setting: Frequency of lamp blinking and buzzing discontinuance, buzzing volume level, input specification. (refer to the instruction manual) Power LED: Green light turns on when the power is supplied. Lamp: Red, amber, green, blue and white LEDs on/blinking (approx. 2 Hz, 10 Hz) Buzzing: Approx. 3.3 kHz Interval: continuous/intermittent (approx. 2 Hz, 10 Hz)
INPUT SPECIFICATIONS ■ Discrete Input: Dry contact, open collector PNP NPN Input resistance: Approx. 50 kΩ Common: Negative common NPN, positive common PNP Sensing: Approx. 24 V DC ON/OFF level: ≤ 4 V / ≤ 10 kΩ for ON; ≥ 20 V / ≥ 100 kΩ for OFF
INSTALLATION Power consumption •AC: Approx. 5 VA at 100 V Approx. 7 VA at 200 V Approx. 8 VA at 240 V •DC: Approx. 2.5 W; approx. 100 mA Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas Mounting: Direct mounting Mounting direction: Vertical Weight: 1.4 kg (3.1 lb)
PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (Discrete input to power input to FE1)
NAGANOKEIKI
