M2EAXV DC ALARM (PC programmable, dual or quad alarm trip
Cập nhật: 2/17/2020 - Số lượt đọc: 3247
Thông tin sản phẩm
Giá:
Call
Hãng sản xuất:
M-system
Bảo hành:
Số lượt xem:3247
M2EAXV Super-mini Signal Conditioners with Display Mini-M M2E Series
DC ALARM (PC programmable, dual or quad alarm trip)
Functions & Features • Provides relay outputs at preset DC input levels • Quad or dual trip • Front LCD display indicating values in scaled engineering unit range is used to program the module • Adjustable deadband (hysteresis) • ON delay time selectable • Hi/Lo trip and energized/de-energized coil independently selectable for each setpoint • Settable with front button • Enclosed relays • Relays can be powered by 200 V AC and 100 V DC • High-density mounting on DIN rail Typical Applications • Annunciator • Various alarm applications
MODEL: M2EAXV–[1]-[2][3]
ORDERING INFORMATION • Code number: M2EAXV-[1]-[2][3] Specify a code from below for each [1] through [3]. (e.g. M2EAXV-2-M2/Q) • Specify the specification for option code /Q (e.g. /C01/S01/SET)
INPUT – Field-selectable ◆ DC Input • Current input: 0 - 50 mA DC • Voltage input: -1000 - +1000 mV DC • Voltage input: -10 - +10 V DC
[1] OUTPUT 2: 4 points; N.O. or make contact 3: 4 points; N.C. or break contact 5: 2 points; SPDT or transfer contact
[2] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
[3] OPTIONS blank: none /Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-5146) Default setting will be used if not otherwise specified.
RELATED PRODUCTS • M2EA configurator software (model: M2EACFG) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual (EM-5151) for the M2EA configurator for applicable cable types.
GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (gray) Isolation: input to L1 or L4 alarm output to L2 or L3 alarm output to power (for output code 5, L3 alarm output and L4 alarm output is not available) Configuration: Program with front buttons or Via PC. Programmable features include: Refer to the parameter list. Configurator connection: 2.5 dia. miniature jack; RS-232-C level
DISPLAY Display functions: Displays and sets measured range, engineering unit Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”) Number of pixels: 68 × 95 (horizontal × vertical) Character color: Yellow (reversing display of the current value and the alarm setting value when alarm is tripped) Display life: Approx. 60000 hours (Expected time for the Display brightness to be reduced to 50 % when the Display is used continuously with brightness setting 2 in 25 ℃) Display type: OEL display Display digit: Negative 5 digits, positive 6 digits (-99999 to 999999) Decimal point position: Selectable
INPUT SPECIFICATIONS ■ DC Current Input resistance: Incorporated (23 Ω) Input range: 0 - 50 mA DC Minimum span: 2 mA Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. The measurement available for -5 - +105% of input setting range. ■ DC Voltage •Narrow Spans (mV) Input range: -1000 – +1000 mV DC Minimum span: 100 mV •Wide Spans (V) Input range: -10 – +10 V DC Minimum span: 1 V Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. Input resistance: 1 MΩ minimum The measurement available for -5 - +105% of input setting range.
OUTPUT SPECIFICATIONS ■ Quad Alarm Relay rating: 100 V AC @ 1 A (cos ø = 1) 120 V AC @ 1 A (cos ø = 1) 240 V AC @ 0.5 A (cos ø = 1) 30 V DC @ 1 A (resistive load) Maximum switching voltage: 250 V AC or 125 V DC Maximum switching power: 120 VA or 30 W Minimum load: 5 V DC @ 10 mA Mechanical life: 5 × 107 cycles ■ DUAL ALARM Relay rating: 100 V AC @ 4 A (cos ø = 1) 120 V AC @ 4 A (cos ø = 1) 240 V AC @ 2 A (cos ø = 1) 30 V DC @ 4 A (resistive load) Maximum switching voltage: 250 V AC or 125 V DC Maximum switching power: 480 VA or 150 W Minimum load: 5 V DC @ 10 mA Mechanical life: 5 × 107 cycles
INSTALLATION Power Consumption •AC: Max. 5 VA at 100 V Max. 6 VA at 200 V Max. 7 VA at 264 V •DC: ≤ 2.5 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 10 to 85 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of FS input Accuracy (display accuracy, setting accuracy): ± (0.1% of FS + 1 digit) See CALCULATION EXAMPLES OF OVERALL ACCURACY. Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time (Filter time constant: 0 sec.): ≤ 0.5 sec. (0 – 100 % at 90 % setpoint) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (input to L1 or L4 alarm output to L2 or L3 alarm output to power to ground) (for output code 5, L3 alarm output and L4 alarm output is not available)
STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Measurement Category II (output) Installation Category II (power) Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) L1 or L4 alarm output to L2 or L3 alarm output: Basic insulation (300 V) RoHS Directive EN 50581
EXTERNAL VIEW
Refer to the operating manual (EM-5146-B) for detailed procedures.
PARAMETER LIST
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
NAGANOKEIKI
