27HU-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, outdoor enclosure, explosion-proof)
Functions & Features • Universal input: DC mV, T/C, RTD and resistance • High accuracy • HART communication • Explosion-proof approval • Suitable for Functional Safety applications up to SIL2 • Programming via hand-held communicator or via PC • A wide variety of T/C and RTD types • User’s temperature table can be used • Self diagnostics • Ultra-low temp. drift option (20 ppm/°C typ.) • Stainless steel enclosure optional
MODEL: 27HU–B–[1][2][3][4][5][6][7]
ORDERING INFORMATION • Code number: 27HU-B-[1][2][3][4][5][6][7] Specify a code from below for each [1] through [7]. (e.g. 27HU-B-0L1T01/S). Use Ordering Information Sheet (No. ESU-7652). Factory standard setting will be used if not otherwise specified. Specify the country in which the product is to be used with the Safety Approval code 4.
[1] SAFETY APPROVAL Confirm selectable combinations of approval and wiring conduit types in the table below. 0: None 3: FM explosion-proof 4: ATEX flameproof 8: TIIS flameproof (CE not available)
[2] TEMPERATURE DRIFT 0: Standard (temp. coefficient 0.015 %/°C) L: Ultra-low temperature drift (temp. coefficient 0.002 %/°C typ. 0.005 %/°C max.)
[3] LED INDICATOR 0: Without 1: With (SIL not available)
[4] TERMINAL BLOCK 0: None (Output connection: Terminals on module) (For TIIS, selectable only with ‘No indicator’ option.) T: Incorporated (Selectable only with the LED indicator option)
[5] WIRING CONDUIT Confirm selectable combinations of approval and wiring conduit types in the table below. 0: G 1/2 1: 1/2 NPT 2: M20 × 1.5 3: PG 13.5
RELATED PRODUCTS • RS-232-C interface Bell202 modem (model: COP-H) Usable in ‘non-hazardous’ area only. • USB interface Bell202 modem (model: COP-HU) Usable in ‘non-hazardous’ area only. • Hand-held communicator • PC configurator software (model: 27HUCFG) Downloadable at M-System’s web site. • Cable gland (model: BX-E-SXY)
PACKAGE INCLUDES... • Cable gland: Two provided for TIIS flameproof type Model No.: BX-E-SXY Cable entries: Elastomeric sealing rings Wiring conduit size: G 1/2 Material: Chrome-plated brass (entry) CR (sealing ring) Applicable wire size: 8 - 12 dia. • Mounting bracket assembly (option) Mounting bracket: 1 M10 U-bolt: 2 Nut for M10: 4 Spring washer for M10: 4 Material: Stainless steel 304 Applicable pipe: 1 1/2” min.; 2” max. • Engineering unit label (1)
GENERAL SPECIFICATIONS Degree of protection: NEMA 4X, IP66/IP67 Wiring conduit: See ‘Ordering information.’ Connection: • Without terminal blockand indicator: M3 screw terminal in transmitter (Torque: 0.5 N･m) • Without terminal blockwith indicator: Input signal: M3 screw terminal in transmitter (Torque: 0.5 N･m) Output signal: Euro terminal (Applicable wire size: 0.14 to 1.5 mm2 (AWG26 to 16), stripped length: 6 mm) • With Terminal block and indicator: Input signal: M3 screw terminal in transmitter (Torque: 0.5 N･m) Output signal: M3 screws in terminal block (Torque: 0.5 N･m) Screw terminal • Input signal: Nickel-plated brass • Output signal: Without terminal block and indicator: Nickel-plated brass With terminal block and indicator: Nickel-plated steel Materials Transmitter Housing: Flame-resistant resin (black) Indicator Housing: Flame-resistant resin (black) Enclosure material: Diecast aluminium standard; SCS14 stainless steel casting optional (equivalent to type 316); silver color, epoxy resin coated Isolation: Input to output to outdoor enclosure User-configurable items: · Input sensor type and numbers · Number of wires (RTD & resistance) · Input range (inverted range selectable) · Burnout · Output limits (Upper / Lower) · Damping time (factory set to 0) · Cold junction compensation (T/C; internal or external sensor selectable) · Linearization · Sensor calibration · Output calibration · HART communication mode Refer to the HART setup manual or the PC configurator users manual for the detail.
HART COMMUNICATION Protocol: HART communication protocol HART address range: 0 – 15 (factory set to 0) Transmission speed: 1200 bps Digital current: Approx. 1 mAp-p when communicating Character format: 1 Start Bit, 8 Data Bits, 1 Odd Parity Bit, 1 Stop Bit Distance: 1.5 km (0.9 miles) HART communication mode: Master-Slave Mode and Burst Mode (factory set to Master-Slave) HART network mode: Point-to-Point Mode and Multi-drop Mode; automatically set to Multi-drop Mode when the address is set to other than 0.
LED INDICATOR (option) LED: 8 mm (.3”) 7-segment, red Number of display digits: 4 Scaling range: -1999 to 9999 Offset range: -1999 to 9999 Decimal point position: 10 –1, 10 –2, 10 –3, or no decimal point Polarity sign: Minus (–) sign added automatically according to the computation result Read rate: 2.5/s Over-range warning: All segments dark except the top ones that blink with the input exceeding the display/measurable range; or the bottom ones that blink with the input below the range. Engineering unit display: Unit label included; LED backlight provided Engineering unit indication: Sticker label attached DC, AC, W, ℃ , °F, V, mV, A, mA, %, kW, mW, kV, kA, psi, K, bar, barg, Nℓ/min, kvar, Mvar, var, m, mm, kg, kg/h, kPa, MPa, N·m, Nm3/h, m3/h, m3/sec, m/sec, kgf/cm2, ℓ/min, %RH, ℓ, ℓ/h, t/h, rpm, ppm, pH, Pa
INPUT SPECIFICATIONS The input is factory set for use with K thermocouple, single input, 0 to 100°C, internal CJC sensor. See Table 1 for the available input type, the minimum span and the maximum range. ■ DC mV (dual input available) Input resistance: ≥ 1 MΩ ■ Thermocouple (dual input available) Input resistance: ≥ 1 MΩ Burnout sensing: 33 μA External CJC sensor type: Pt 100 ■ RTD (2-wire, 3-wire or 4-wire) Input resistance: ≥ 1 MΩ Excitation: 0.2 mA Allowable leadwire resistance: Max. 10 Ω per wire ■ Resistance (2-wire, 3-wire or 4-wire) Input resistance: ≥ 1 MΩ Excitation: 0.2 mA Allowable leadwire resistance: Max. 10 Ω per wire
OUTPUT SPECIFICATIONS Output range: 4 – 20 mA DC Operational range: 3.75 – 23 mA Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 8 (V)*) ÷ 0.023 (A) (including leadwire resistance) *12 (V) with LED indicator option. Burnout: 3.75 – 3.8 mA or 21.5 – 23 mA (factory set to 23 mA) Upper output limit proportional to the input: 20 – 21.5 mA (factory set to 21.5 mA) Lower output limit proportional to the input: 3.8 – 4 mA (factory set to 3.8 mA) Update time: 440 msec. (660 msec. with dual input) Output characteristics for dual input: Average or Differential selectable
INSTALLATION Supply voltage Non-approved: 8 – 35 V DC (without LED indicator) 12 – 39 V DC (with LED indicator) ATEX & FM: 8 – 32 V DC (without LED indicator) 12 – 32 V DC (with LED indicator) TIIS: 8 – 28 V DC (without LED indicator) 12 – 32 V DC (with LED indicator) Operating temperature Non-approved: -40 to +85°C (-40 to +185°F) ATEX & FM: T5, -40 to +80°C (-40 to +176°F) T6, -40 to +70°C (-40 to +158°F) TIIS: T6, -20 to +60°C (-4 to +140°F) Weight: · Unit Approx. 1.3 kg (2.9 lb), aluminium Approx. 4.0 kg (8.8 lb), stainless steel Approx. 2.0 kg (4.4 lb), TIIS flameproof · Mounting bracket set (option) Approx. 0.78 kg (1.72 lb)
PERFORMANCE Accuracy: See Table 1. Display accuracy: ±0.01 mA (Refer to 'how to calculate accuracy against scale'.) Cold junction compensation accuracy: ±0.5°C (±0.9°F) with internal CJC sensor LED indicator temp. coefficient: ±0.015 %/°C Response time: ≤ 2 sec. (0 – 90 %) with damping time set to 0 and when not communicating via HART. Supply voltage effect: ±0.005 % of span/V Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @1 minute (input to output to outdoor enclosure) Safety integrity level according to IEC 61508: Suitable for use in a safety instrumented system up to SIL2 (together with sensor) if appropriate safety instructions are observed. Consult M-System.
HOW TO CALCULATE ACCURACY AGAINST SCALE Example: 4 – 20 mA input, Scale 0 – 100 Accuracy = 0.01 mA ÷ (20 – 4)mA × 100 = 0.063 % Display Error = (100 – 0) × 0.063 % = ±0.063 digits
STANDARDS & APPROVALS EU conformity: ATEX Directive EEx d EN 50018 EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Safety approval: FM: Explosion-proof and Dust-ignition proof Class I, Division 1, Groups B, C and D Class II, Division 1, Groups E, F and G Class III, Division 1 T5 and T6 (Class 3615) TIIS: Flameproof Ex d IIC T6
Mã số : 27HU 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
8-35 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27HU 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B6U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD, Pot and resistance input
12-42 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & 2 approval
B6U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 26TS1 THERMOCOUPLE TRANSMITTER
Specify K, E, J, T, B, R, S, N and temp. range. Special T/C acceptable
12-32 Vdc powered
Fast response 25 msec. optional
26TS1 THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B6U-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD, Pot and resistance input
12-42 Vdc powered (max. 28 V approved)
NEMA 4X, IP66/IP67 enclosure
ATEX Zone 0 approval
FM Class I, II, III, Div. 1 & Class I, II, Div. 2 approval
B6U-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27RS RTD TRANSMITTER
Pt100, Pt1000, Pt500 selectable
Function monitor LED optional
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27RS RTD TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27TS THERMOCOUPLE TRANSMITTER
K, E, J, T, B, R, S, C, D, N, U, L selectable
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27TS THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27R RTD TRANSMITTER
Pt100, Pt1000, Pt500 selectable. Non-isolated.
Function monitor LED optional
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27R RTD TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B5TS - THERMOCOUPLE TRANSMITTER
Specify K, E, J, T, B, R, S, N and temp. range. Special T/C acceptable
12-28 Vdc powered
Fast response 25 msec. optional
B5TS - THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27HU-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
8-35 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27HU-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Functions & Features
• Universal input: mV, V, T/C, RTD, resistance and
potentiometer
• High accuracy
• HART communication
• Intrinsically safe and explosion-proof approval
• Optional stainless steel enclosure
• Programming via hand-held communicator or via PC
• A wide variety of T/C and RTD types
• User’s temperature table can be used
• Self diagnostics
• Input-output isolated
NAGANOKEIKI
