B3VS/1 - SIGNAL TRANSMITTER (single-channel output loop powered isolator)
Functions & Features • Converts a DC input into an isolated 4 – 20 mA DC signal • Monitor terminals • High-density mounting
MODEL: B3VS/1–[1][2]
ORDERING INFORMATION • Code number: B3VS/1-[1][2] Specify a code from below for each [1] and [2]. (e.g. B3VS/1-A/UL/Q) • Special input range (For codes Z & 0) • Specify the specification for option code /Q (e.g. /C01)
[1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) B: 2 – 10 mA DC (Input resistance 499 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 250 Ω) F: 0 – 10 mA DC (Input resistance 499 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS)
[2] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating (UL not available)
GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal (applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm) Housing material: Flame-resistant resin (gray) Isolation: Input to output Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front)
INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.25 W ÷ [F.S. Current]2) ■ DC Voltage: -100 – +100 V DC (Max. voltage across the input terminals: 70 V for conform with EU Directive; 60 V for UL approval) Minimum span: 1 V Offset: Max. 1.5 times span Input resistance: Span 1 – 2 V: ≥ 1MΩ Span ≥ 2 V: ≥ 1MΩ (≥ 80 kΩ with no supply voltage)
OUTPUT SPECIFICATIONS Output: 4 – 20 mA DC Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance)
INSTALLATION Supply voltage: 12 – 45 V DC Operating temperature: -40 to +85°C (-40 to +185°F) Max. 55°C (131°F) for UL approval Operating humidity: 0 to 95 %RH (non-condensing) Mounting: DIN rail Weight: 110 g (0.24 lb)
PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.1 sec. (0 – 90 %) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to ground)
STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.1010-1)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
Mã số : 27HU 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
8-35 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27HU 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B6U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD, Pot and resistance input
12-42 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & 2 approval
B6U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 26TS1 THERMOCOUPLE TRANSMITTER
Specify K, E, J, T, B, R, S, N and temp. range. Special T/C acceptable
12-32 Vdc powered
Fast response 25 msec. optional
26TS1 THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B6U-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD, Pot and resistance input
12-42 Vdc powered (max. 28 V approved)
NEMA 4X, IP66/IP67 enclosure
ATEX Zone 0 approval
FM Class I, II, III, Div. 1 & Class I, II, Div. 2 approval
B6U-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27RS RTD TRANSMITTER
Pt100, Pt1000, Pt500 selectable
Function monitor LED optional
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27RS RTD TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27TS THERMOCOUPLE TRANSMITTER
K, E, J, T, B, R, S, C, D, N, U, L selectable
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27TS THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27U 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27R RTD TRANSMITTER
Pt100, Pt1000, Pt500 selectable. Non-isolated.
Function monitor LED optional
9-35 Vdc powered
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27R RTD TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : B5TS - THERMOCOUPLE TRANSMITTER
Specify K, E, J, T, B, R, S, N and temp. range. Special T/C acceptable
12-28 Vdc powered
Fast response 25 msec. optional
B5TS - THERMOCOUPLE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 27HU-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
DC mV, V & mA, T/C, RTD and resistance input
8-35 Vdc powered (max. 28 V approved)
ATEX Zone 0 approval
FM Class I, Div. 1 & Zone 0 approval
27HU-B 2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Functions & Features
• Universal input: mV, V, T/C, RTD, resistance and
potentiometer
• High accuracy
• HART communication
• Intrinsically safe and explosion-proof approval
• Optional stainless steel enclosure
• Programming via hand-held communicator or via PC
• A wide variety of T/C and RTD types
• User’s temperature table can be used
• Self diagnostics
• Input-output isolated
NAGANOKEIKI
