Functions & Features •Small-size control valve actuator •Direct connection to CC-Link capable PLC and other devices on the same network •Easy wired •Uploading device information via CC-Link for maintenance purpose •1/1000 high resolution Typical Applications • For small size proportional control valve in paper manufacturing or co-generation system • Air conditioning for buildings and factories • Chemical injection at water treatment plant
MODEL: MSP4C–[1][2][3]–0R
ORDERING INFORMATION • Code number: MSP4C-[1][2][3]-0R Specify a code from below for each of [1] through [3]. (e.g. MSP4C-271-0R)
[1] STROKE 1: 5 to 10 mm (.20” to .39”) 2: 8 to 15 mm (.31” to .59”)
[2] OPERATION TIME, THRUST 3: 5 sec. / 10 mm, 150 N 4: 9 sec. / 10 mm, 300 N 7: 18 sec. / 10 mm, 700 N
POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
GENERAL SPECIFICATIONS Degree of protection: IP66 Operation at a communication error: Extend, retract or stop Power circuit connection: 4-core microconnector, male Power cable: Cable with connector (e.g. OMRON XS2F or XS2WD42) Transmission cable: Conforms to CC-Link (e.g. Woodhead CC-Link Micro-Change) Housing material: Cast aluminum Drive: Stepping motor Insulation class: E Position detection: Potentiometer Deadband: 0.1 – 1.9 % adjustable (factory set to 1.5 %) Restarting timer: 0 – 10 sec. adjustable (factory set to 1.5 sec.) Isolation: Housing or communication to power Zero adjustment: 0 – 25 % Span adjustment: 50 - 100 % Protective functions: Overload protection Status indicator LED: Red light blinks in 2 sec. intervals in normal operations; blinks in 0.5 sec. intervals when a foreign object is detected mechanically caught inside. Manual operating handle: Not available
CC-Link COMMUNICATION Protocol: CC-Link V1.10 Device type: Remote device station Station No. setting: Rotary switch; 1 – 64 Required node: 1 Baud rate setting: Rotary switch L RUN indicator: Red LED L ERR. indicator: Red LED
OUTPUT SPECIFICATIONS ■ Operation Time & Torque (at rated power voltage) [Model: Operation Time: Thrust] MSP4C-x3: 5 sec. / 10 mm: 150 N (33.5 lbf) MSP4C-x4: 9 sec. / 10 mm: 300 N (67 lbf) MSP4C-x7: 18 sec. / 10 mm: 700 N (157 lbf)
INSTALLATION Current consumption •DC: Approx. 0.5 A Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 85 %RH (non-condensing) Vibration: 0.5 G (4.9 m/s2) max. Mounting position: All directions Do not mount the actuator with its output stem or cable connector on the upside if the actuator is to be exposed to dripping water. Weight: 1.5 kg (3.3 lb)
PERFORMANCE Resolution: 1/1000 or 0.015 mm, whichever is greater, with 0.1 % deadband setting Insulation resistance: ≥ 100 MΩ with 100 V DC Dielectric strength: 100 V AC @ 1 minute (housing or communication to power)
NAGANOKEIKI
