54ULMULTI POWER MONITOR (4 digital displays, LonWorks)
Functions & Features • LonWorks communication • Measures simultaneously several variables of a heavy-current power system: current, voltage, active, reactive and apparent power, active and reactive energy, power factor, frequency, etc. • All measured values, counter values, display mode, setting data are stored in the non-volatile memory at the power off • Parameters are programmable using the front buttons or the PC via infrared interface • Mounted using M5 screws or mounting brackets • 60-segment bargraph • Displayed measurands are freely selectable • Open collector output for alarm or energy count • Loop test output Typical Applications • Multi-functional power monitor incorporated in an electric device: saves space, wiring works, and cost
MODEL: 54UL-[1][2][3][4]-AD4[5]
ORDERING INFORMATION • Code number: 54UL-[1][2][3][4]-AD4[5] Specify a code from below for each of [1] through [5]. (e.g. 54UL-1211-AD4/E/Q) • Specify the specification for option code /Q (e.g. /C01/S01)
[1] CONFIGURATION 1: Single phase / 2-wire and 3-wire, 3-phase / 3-wire 2: Single phase / 2-wire and 3-wire, 3-phase / 3-wire and 4-wire
[2] INPUT 1: 480 V / 1 A AC 2: 480 V / 5 A AC
[3] DISCRETE INPUT 0: None (‘External Interface’ code 1 Not selectable.) 1: 24V DC ('External Interface' codes 2 Not selectable.) 2: 110V DC ('External Interface' codes 2 Not selectable.)
[4] EXTERNAL INTERFACE 1: LonWorks, Do × 1, Di × 1 2: LonWorks, Do × 2
AUXILIARY POWER SUPPLY AD4: universal 100 – 240 V AC (Operational range 85 – 264 V, 50 / 60 Hz) / 110 – 240 V DC (Operational range 99 – 264 V, ripple 10 %p-p max)
[5] OPTIONS (multiple selections) Language blank: Japanese /E: English Other Options blank: none /Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) Moving parts and indicators are not coated. /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel
RELATED PRODUCTS • Infrared Communication Adaptor (model: COP-IRU) • PC configurator software (model: PMCFG) • XIF File (Device Interface File) XIF file is used to define a LonWorks device when programmed on LonMaker. The XIF files and Software are downloadable at M-System’s web site.
GENERAL SPECIFICATIONS Construction: 110-mm square panel flush mounted Degree of protection Front panel: IP 50 Terminal block, housing: IP 30 Connection Voltage input: M4 screw terminals (torque 1.4 N·m) Current input: M4 screw terminals (torque 1.4 N·m) Discrete input, discrete output, LonWorks, auxiliary power supply: M3 screw terminals (torque 0.6 N·m) Configuration Code 1: Single phase/2-wire and 3-wire, 3-phase/3- wire balanced/unbalanced load Code 2: Single phase/2-wire and 3-wire, 3-phase/3- wire balanced/unbalanced load, 3-phase/4- wire balanced/unbalanced load Screw terminal • M3 screw: Nickel-plated steel (standard) or stainless steel • M4 screw: Nickel-plated brass (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Voltage input to current input to discrete input to LonWorks or FG to discrete output to power ■ Measured variables Voltage: 1 – 2, 2 – 3, 3 – 1, 1 – N, 2 – N, 3 – N Current: 1, 2, 3, N Active / reactive / apparent power: 1, 2, 3, Σ Power factor: 1, 2, 3, Σ Frequency Phase angle between voltages: 1 – 2, 2 – 3, 3 – 1 Active energy incoming / outgoing: Σ Reactive energy inductive / capacitive: Σ Apparent energy: Σ Active / reactive / apparent power intervals (demand) Current intervals (demand): 1, 2, 3, N Harmonic contents: Σ, 2nd to 31st Voltage: 1 – 2, 2 – 3, 3 – 1, 1 – N, 2 – N, 3 – N Current: 1, 2, 3, N Max. and min. values:1 = R, 2 = S, 3 = T Infrared communication: Transmission distance max. 1 meter (for use with the COP-IRU and PMCFG) ■ DISPLAY: LCD with LED backlight (LED OFF timer available) Signed: 4 digits, 2 lines Energy: 9 digits, 1 line Bargraph: 1 point (60 segments)
LonWorks COMMUNICATION Neuron chip: FT3150 (NeuronID printed in numeric and bar code [peel-off code 39 format] under the specification marking on the product; two sticker labels attached) Transceiver: FT-X1 (equivalent to FTT-10A) Transmission speed: 78 kbps Twisted-pair cable Distance, free topology: 500 meters Max. 64 nodes/channel LNS: Ver.3.0 Service Pack 8 or higher Service lamp: Red LED (used as infrared LED for communication with COP-IRU) • Off: Normal operations • Blinking in approx. 0.5 Hz: No network information • On: Internal program error SERVICE switch: Used to identify the node in LonWorks network configuration RESET switch: Resetting the Neuron Chip
INPUT SPECIFICATIONS Frequency: 50 / 60 Hz (45 – 65 Hz) • Voltage Input Rated voltage Line-to-line (delta voltage): 480 V Line-neutral (phase voltage): 277 V Consumption VA: ≤ ULN2 / 300 kΩ / phase Overload capacity: 200 % of rating for 10 sec., 120 % continuous Selectable primary voltage range: 50 – 400 000 V • Current Input Rated current: 1 A or 5 A Consumption VA: ≤ I2 · 0.01 Ω / phase Overload capacity: 4000 % of rating for 1 sec., 2000 % for 4 sec., 120 % continuous Selectable primary current range: 1 – 20 000 A Operational range Voltage, current, apparent power: ≤ 120 % of the rating Active / reactive power: -120 to +120 % of the rating Frequency: 45 – 65 Hz Power factor: -1 to +1 ■ Discrete Input: 24 V DC or 110 V DC (input resistance 6 kΩ) Detecting voltage: External 24 V DC ±10 % or 110 V DC ±10 % ON current: ≥ 1 mA (≤ 24 kΩ @ 24 V, ≤ 110 kΩ @110 V) OFF current: ≤ 0.1 mA (≥ 240 kΩ @ 24 V, ≥ 1.1 MΩ @ 110 V) Detecting time: 10 – 1000 msec. Usable to reset energy count or to update average (demand) value.
OUTPUT SPECIFICATIONS ■ Open Collector Programmable for either alarm or energy count. Max. rated load: 130 V DC @50 mA Continuous rated load: 130 V DC @30 mA Saturation voltage: 1.5 V DC Measurands applicable to alarm: Voltage, current, average current (demand), neutral current, frequency, power, average power (demand) (ON delay, deadband and other parameters are selectable) Measurands applicable to count: Energy; Pulse rate selectable within 0.1 – 10 000.0 kWh/p, kvarh/p, kVAh/p
INSTALLATION Power consumption •AC: < 8 VA •DC: < 4 W Operating temperature: -10 to +55°C (14 to 131°F) Storage temperature: -20 to +80°C (-4 to +176°F) Operating humidity: 90 % RH max. (non-condensing) Mounting: Panel flush mounting (M5 screws (torque 2 N·m) or mounting brackets) Weight Configuration Code 1: 500 g (1.1 lb) Configuration Code 2: 525 g (1.16 lb)
PERFORMANCE Accuracy (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65 Hz) Voltage: ±0.3 %; Rated voltage at ≥ 100 V, 100 V at < 100 V Current: ±0.3 %; of Span 1 A or 5 A Power: ±0.5 %; Rated voltage/current at ≥ 100 V Wattage as listed below at < 100 V: 173.2 W (1 A) or 866 W (5 A) for 3ph/3w 100 W (1 A) or 500 W (5 A) for 1ph/2w 200 W (1 A) or 1000 W (5 A) for 1ph/3w 300 W (1 A) or 1500 W (5 A) for 3ph/4w PF: ±0.5 % Frequency: ±0.1 % of Span Energy: ±1 % Harmonic: ±1 % of Span Sampling rate: 64 samples per cycle Data update period: Harmonic contents and frequency: ≤ 1.1 sec. Other: ≤ 600 msec. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (voltage input to current input to discrete input to LonWorks or FG to discrete output to power) 2000 V AC @1 minute (circuits to housing)
Mã số : CLSE CLAMP-ON CURRENT SENSOR
Easy-to-install, spring-loaded, clamp-on type current sensor
Over-voltage clamp element for safety in open circuit
Wide frequency band
Screw terminal connection
CLSE CLAMP-ON CURRENT SENSOR
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : CLSC - CLAMP-ON CURRENT SENSOR
Easy-to-install, clamp-on type current sensor
Over-voltage clamp element for safety in open circuit
1A Output
Wide frequency band
Screw terminal connection
CLSC - CLAMP-ON CURRENT SENSOR
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : CTS2 - HIGH AC CURRENT TRANSMITTER
Detecting high current at the flexible current probe and
providing a porportional low-ripple standard signal
appropriate for computer use
Wide frequency band can be accepted
Clipped around a conductor without disconnecting the conductor
Rogowski coil type
Isolation up to 2000 V AC
High-density mounting
CTS2 - HIGH AC CURRENT TRANSMITTER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : L53U MULTI POWER TRANSDUCER
Single type module is usable for all of single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems.
All measured variables can be transmitted to the host PC via RS-485/Modbus RTU.
Energy count pulse or limit alarm output selectable
Up to 4 optional analog outputs
Remote and local programming using the PC Configurator Software
Input range up to 480 Vac, 1 A or 5 A
DIN rail mounted
L53U MULTI POWER TRANSDUCER
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 54UL MULTI POWER MONITOR
110 x 110 mm panel size
Robust screw terminal connection
Four digital displays
60-segment bargraph
Single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems
All measured variables can be transmitted to the host PC via RS-485/Modbus RTU or CC-Link,LONWORKS
Energy count pulse or limit alarm output selectable
Up to 4 optional analog outputs
Programming lock to prevent unwanted configuration changes
Input range up to 480 Vac, 1 A or 5 A
Modbus:54U CC-Link:54UC LONWORKS:54UL
54UL MULTI POWER MONITOR
M-System Việt Nam
Email: Sales@m-system.com.vn
Mã số : 54UC MULTI POWER MONITOR
110 x 110 mm panel size
Robust screw terminal connection
Four digital displays
60-segment bargraph
Single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems
All measured variables can be transmitted to the host PC via RS-485/Modbus RTU or CC-Link,LONWORKS
Energy count pulse or limit alarm output selectable
Up to 4 optional analog outputs
Programming lock to prevent unwanted configuration changes
Input range up to 480 Vac, 1 A or 5 A
Modbus:54U CC-Link:54UC LONWORKS:54UL
54UC MULTI POWER MONITOR
M-System Việt Nam
Email: Sales@m-system.com.vn
• Converts alternating current from a current transformer
into a standard process signal
• Minimum ripple
• Isolation up to 2000 V AC
• High-density mounting
• Conforms to IEC 60688
NAGANOKEIKI
